Posted by Rod Connors on 3/1/2022 to
Free Jewelry Patterns
Botanical Garden Bracelet
Free Jewelry Making Pattern
By Kim Connors - www.Bead3.com
Materials
3 – 12-inch lengths of Silver-Colored Buddy Braids
1 ½ inches of Antique Silver-Plated 6x4mm Cable Chain
2 – Antique Silver-Plated 16x24mm Ornate 3-Loop Connectors
1 – Antique Silver-Plated 15x8mm Lobster Clasp
3 – Antique Silver-Plated 5mm Jump Rings
6 – Antique Silver-Plated Crimp Tubes
1 – Antique Silver-Plated Ball Pin
49 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Caps
48 – Antique Silver-Plated 1.5x4mm Beaded Rondelles
25 – Old Lace 3mm Czech Glass Pearls
24 – Half Silver Shade 4mm Crystal Bicones
16 – Peridot AB 6x4mm Glass Crystal Rondelles
12 – Qinghai Jade 6mm Semiprecious Rounds
Create Bracelet
Take one length of Silver Colored Buddy Braids and thread a crimp tube ½ inch away from the end. Thread the top loop of 1 – Antique Silver-Plated 16x24mm Ornate 3-Loop Connector and thread the Buddy Braids back through the crimp tube. Squeeze the crimp tube closed using a pair of crimping pilers approximately 1/8 inch away from the loop.
Thread the following:
1 – Peridot AB 6x4mm Crystal Rondelle, 1 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Cap, 1 – Old Lace 3mm Glass Pearl, 1 – Antique Silver-Plated 1.5x4mm Beaded Rondelle, 1 – Half Silver Shade 4mm Crystal Bicone, 1 – Antique Silver-Plated 1.5x4mm Beaded Rondelle, 1 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Cap, 1 – Qinghai Jade 6mm Semiprecious Round, 1 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Cap, 1 – Antique Silver-Plated 1.5x4mm Beaded Rondelle, 1 -Half Silver Shade 4mm Crystal Bicone, 1 – Antique Silver-Plated 1.5x4mm Beaded Rondelle, 1 – Old Lace 3mm Glass Pearl, and 1 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Cap.
Repeat pattern in Step (a.) THREE times.
Thread 1 – Peridot AB 6x4mm Crystal Rondelle.
Thread a crimp tube and the top loop of the other Antique Silver-Plated 16x24mm Ornate 3-Loop Connector. Thread the Buddy Braids back through the crimp tube and several of the last beads you added in the previous step. Pull the Buddy Braids tight leaving approximately 1/8 inch away from the loop. Squeeze the crimp tube closed using a pair of crimping pilers.
Take one length of Silver Colored Buddy Braids and thread a crimp tube ½ inch away from the end. Thread the middle loop of 1 – Antique Silver-Plated 16x24mm Ornate 3-Loop Connector and thread the Buddy Braids back through the crimp tube. Squeeze the crimp tube closed using a pair of crimping pilers approximately 1/8 inch away from the loop.
Thread the following:
1 – Peridot AB 6x4mm Crystal Rondelle, 1 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Cap, 1 – Old Lace 3mm Glass Pearl, 1 – Antique Silver-Plated 1.5x4mm Beaded Rondelle, 1 – Half Silver Shade 4mm Crystal Bicone, 1 – Antique Silver-Plated 1.5x4mm Beaded Rondelle, 1 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Cap, 1 – Qinghai Jade 6mm Semiprecious Round, 1 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Cap, 1 – Antique Silver-Plated 1.5x4mm Beaded Rondelle, 1 -Half Silver Shade 4mm Crystal Bicone, 1 – Antique Silver-Plated 1.5x4mm Beaded Rondelle, 1 – Old Lace 3mm Glass Pearl, and 1 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Cap.
Repeat pattern in Step (a.) THREE times.
Thread 1 – Peridot AB 6x4mm Crystal Rondelle.
Thread a crimp tube and the middle loop of the other Antique Silver-Plated 16x24mm Ornate 3-Loop Connector. Thread the Buddy Braids back through the crimp tube and several of the last beads you added in the previous step. Pull the Buddy Braids tight leaving approximately 1/8 inch away from the loop. Squeeze the crimp tube closed using a pair of crimping pilers.
Take one length of Silver Colored Buddy Braids and thread a crimp tube ½ inch away from the end. Thread the bottom loop of 1 – Antique Silver-Plated 16x24mm Ornate 3-Loop Connector and thread the Buddy Braids back through the crimp tube. Squeeze the crimp tube closed using a pair of crimping pilers approximately 1/8 inch away from the loop.
Thread the following:
1 – Peridot AB 6x4mm Crystal Rondelle, 1 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Cap, 1 – Old Lace 3mm Glass Pearl, 1 – Antique Silver-Plated 1.5x4mm Beaded Rondelle, 1 – Half Silver Shade 4mm Crystal Bicone, 1 – Antique Silver-Plated 1.5x4mm Beaded Rondelle, 1 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Cap, 1 – Qinghai Jade 6mm Semiprecious Round, 1 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Cap, 1 – Antique Silver-Plated 1.5x4mm Beaded Rondelle, 1 -Half Silver Shade 4mm Crystal Bicone, 1 – Antique Silver-Plated 1.5x4mm Beaded Rondelle, 1 – Old Lace 3mm Glass Pearl, and 1 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Cap.
Repeat pattern in Step (a.) THREE times.
Thread 1 – Peridot AB 6x4mm Crystal Rondelle.
Thread a crimp tube and the bottom loop of the other Antique Silver-Plated 16x24mm Ornate 3-Loop Connector. Thread the Buddy Braids back through the crimp tube and several of the last beads you added in the previous step. Pull the Buddy Braids tight leaving approximately 1/8 inch away from the loop. Squeeze the crimp tube closed using a pair of crimping pilers.
Prepare Extension Chain
Create crystal drop for the end of the extension chain by adding 1 – Peridot AB 6x4mm Crystal Rondelle, 1 – Antique Silver-Plated 2x6mm 6-Point Flower Bead Cap, and 1 – Old Lace 3mm Glass Pearl to a ball pin. Using a pair of round nose pliers create a 90° bend in the ball pin above the crystal. Holding the ball pin where you created the bend wrap the ball pin around the pliers to create a loop. Then wrap the ball pin around itself below the loop as many times as you can. Trim the excess ball pin you could not wrap around.
Twist open one 5mm jump ring. Add the loop of the crystal drop you just created and the last loop of one end of the cable chain. Twist the jump ring closed.
Assemble Bracelet
Twist open one 5mm jump ring. Add the loop of the lobster clasp and the loop of one of the Antique Silver-Plated 16x24mm 3-Loop Ornate Connector. Twist the jump ring closed.
Twist open one 5mm jump ring. Add the loop of the other Antique Silver-Plated 16x24mm 3-Loop Ornate Connector and the last loop of the extension chain that does not have the dangle. Twist the jump ring closed.
You are done!! This pattern makes a bracelet that is adjustable 8 to 10 inches. To make the bracelet shorter be sure to remove the same number of beads from each length of Buddy Braids!
Tagged Products
$2.95
In Stock - Ships Immediately!
$2.55
In Stock - Ships Immediately!
$2.25
In Stock - Ships Immediately!
$1.95
Out of Stock.
$1.25
In Stock - Ships Immediately!
$2.45
In Stock - Ships Immediately!
$1.95
In Stock - Ships Immediately!
$1.75
In Stock - Ships Immediately!
$2.95
In Stock - Ships Immediately!
$3.95
In Stock - Ships Immediately!
$1.10
In Stock - Ships Immediately!
